Shandong Shengtai instrument co.,ltd
Shandong Shengtai instrument co.,ltd
Add to Cart
antifreeze corrosion meter Antifreeze corrosion tester Coolant corrosion meter ASTM D1384
SH0085 antifreeze corrosion meter is designed and manufactured according to the requirements of the SH/T0085 and ASTM D1384 standard of the petrochemical industry of the people's Republic of China, which is applicable to the determination method according to the SH/T0085 standard. To determine the corrosion degree of high boiling point and low boiling point engine coolant and its concentrated liquid to typical metal test piece, the SH0085 corrosion tester has its own silent air compressor after upgrading, no need to install air source manually.
| temperature control range | room temperature ~ 100 ℃ ±0.1 ℃ |
| Fired cup | made of heat-resistant glass High type noiseless 1000ml, in line with the requirements of SH/T0085 |
| Gas diffusion tube | the diffuser head is made of sand core glass, and the diameter of the pipe is made of heat resistant glass. |
| reflux condensing pipe | water-cooled type, casing length is not less than 400 mm. |
| timekeeper | timing range 099 999 h |
| Air Flowmeter | flow range 30~300ml/min. |
Technical parameter :
1.temperature control range: room temperature ~ 100 ℃ ±0.1 ℃
2.Fired cup: made of heat-resistant glass. High type noiseless 1000ml, in line with the requirements of SH/T0085
3.Gas diffusion tube: the diffuser head is made of sand core glass, and the diameter of the pipe is made of heat resistant glass.
4.reflux condensing pipe: water-cooled type, casing length is not less than 400 mm.
5.Air Flowmeter: flow range 30~300ml/min.
6.timekeeper: timing range 099 999 h
7. ambient temperature: -10 ℃ ~ 35 ℃.
8, relative humidity: ≤ 85.
9, power consumption: no more than 2000W.
Size and material of test piece:
SH/T0085 engine coolant corrosion test group (glassware method)
50x20x2mm (20 # steel, brass sheet, copper sheet)
50x25x3.5mm(cast aluminum, solder, cast iron)
Single center hole:φ7.0mm
Supporting products:
Brass washer, insulating washer, steel washer, insulating sleeve, brass support
OUR service
After-sales service commitment, our company to sell the product after-sales service commitment: warranty period of one year, long-term technical support outside the warranty period. During the warranty period, the seller shall bear the cost of the replacement of the equipment, the freight and maintenance of the instrument; outside the warranty period, the seller shall waive the maintenance fee and charge only the cost of the basic materials and freight charges when the instrument is malfunctioning and the seller shall not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Wechat:+86 13370527859
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:13370527859wang@labtool.net
Web:www.labtool.net/en