Accuracy 0.1℃ Plaster Softening Point Tester ST104A Heating Rate 1-1.5 ℃/Min

ST104A Plaster softening point tester

The ST104A plaster softening point tester is designed and manufactured strictly in accordance with the "2025 Chinese Pharmacopoeia 2102 Plaster Softening Point Determination Method". This method is used to determine the temperature of plaster when it softens under specified conditions, that is, the temperature at which the plaster falls by 25mm due to heat is measured according to the following method. Used to detect the age and tenderness of plasters, and can indirectly reflect the viscosity of plasters.

The principle for determining the softening point of plaster is to place the plaster sample in a sample ring, place a steel ball at the center of the plaster sample surface, and place the sample ring with plaster in a water bath from a bracket. As the temperature of the water bath increases, the plaster softens and the steel ball sinks. When the steel ball dragging the plaster sample comes into contact with the bottom plate, the temperature recorded at this moment is the softening point temperature of the plaster.

Main features:

The temperature is controlled by the instrument without any human error.

High precision temperature probe, sensitive to temperature response.

Strong magnetic stirring device, more uniform test temperature

LCD screen can display temperature in real-time.

Can measure high temperature, medium is water or glycerol. (Water is recommended for temperatures below 90 degrees Celsius, and glycerol is recommended for temperatures above 90 degrees Celsius)

Specification:

Compliant with standard: 2025 Chinese Pharmacopoeia 2102 Method for determination of softening point of ointment

Power supply voltage: 220V

Test range: Room temperature -100 ℃ (customizable high temperature up to 180 ℃)

Timing range: 0-99 minutes and 99 seconds

Temperature measurement accuracy: 0.1℃

Heating rate: 1-1.5 ℃/min according to pharmacopoeia regulations

Heating up: automatic detection, automatic determination of softening point temperature.

Steel ball: diameter 9.53mm, weight 3.50 ± 0.05g (in accordance with pharmacopoeia)

Instrument size: 400 * 310 * 580mm Weight: 12.0kg (new)

Packaging size: 495 * 405 * 660mm Weight: 20.0kg (wooden crate) (new)

Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes without prior notice.

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.

Packing list